PDG10-4T2R2

252.81

Availability: In Stock

PDG10 Smart Pump Drive

The PDG10 Series Smart Pump Drive is a multi-purpose water pump speed control product independently developed by SAJ. It is installed in the electric control cabinet and can be connected to various senor signals such as pressure sensors, remote pressure gauges and pressure switches. The system is simple in operation, high in reliability, low in noise, and cost-effective. Each pump is equipped with a pump drive, which can realize multi-pump smart on-line operation.

Avaibility: In Stock
Share:
Starting torque:0.5Hz 100%
Speed adjustable range:1:100
speed-holding precision:±1.0%
Overload capability:150% rated current for 60s; 180% rated current for 1s
Acceleration/deceleration time:Range: 0.01 ~ 360s
Start frequency:0.01~10.00Hz
Input voltage:220V/380V±15%
Input frequency range:50/60Hz, fluctuation range: ±5%
Output voltage:0 ~ rated input voltage
Output frequency:0~50/60Hz
Programmable digital input:6 ways of digital terminal input
Programmable analog input:AI1: 0/4 ~ 20mA; To switching 0~10V by setting parameters AI2: 0/4 ~ 20mA; To switching 0~10V by setting parameters
Relay output:2 way of output, programmable
Open-collector output:1 way of output, programmable
Analog output:Reserved
Command running channel:Three kinds of channels: 1. operation panel 2. control terminal 3.serial communication port, choose 1 and 2 for host drive and 3 for auxiliaries
Multi-Pump Smart Link:One drive in the system can be host and controls auxiliaries(4 at most) to work by communication mode. Host sends PID feedback to auxiliaries and monitors status of auxiliaries in real time. If failure occurs, the auxiliary will be skipped.
Integrated PID:Advanced PID arithmetic to realize closed loop control system
AVR:When grid voltage changes, it keeps output voltage constant automatically. By default, it doesn’t work at deceleration.
Stall control:Automatically limit current and voltage at running period to prevent tripping caused by frequent overcurrent/overvoltage.
Water shortage protection:Controller detects that pipe network pressure is lower than water shortage pressure, system stops working automatically. After set period, it restarts automatically for specified times. If pressure restores to normal, system works normally. Otherwise, system stops automatically in case of idle running of pump and prolongs pump lifetime in maximum.
High pressure alarm:When pressure exceeds set pressure, it stops automatically to prevent pipe network from high pressure.
Automatic energysaving running:Decrease output voltage automatically at light load to save energy.
Password setting:4-bit password can be set with non-zero numbers. Exit password setting interface and the password will be valid after 1 minute.
Parameter lock:Define whether the parameter is locked in running or stopped state in case of misoperation.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

PDG10 Smart Pump Drive User Manual-2020

Download

SAJ Smart Pump Drive Catalogue-201910

Download